 FLUOROPOLYMER LINE PRODUCTS |
|
The Lined Pipe System finds use in industries like Chemical, Petrochemical, Pharmaceutical, Food Fertilizers, etc... A majority of these industries make use of highly corrosive and hazardous acids and solvents in their processing applications. Being highly acidic and corrosive in nature, these chemicals tend to corrode and eat away the steel piping used as conveyors, rendering the system useless and unsafe for further use. Corrosion engineers are fast realising the long-term benefits of using high performance fluoropolymers to prevent corrosion of process piping systems.
We do PTFE lined 90° and 45° elbows, tees, reducers, reducing flanges, blind flanges, spacers dip pipes, spargers and thermocouple. |
|
| SELECTION OF LINING MATERIAL AS PER YOUR TEMPERATURE REQUIRMENT |
|
| In the chemical process industries, the temperature & method of the lining materials must be carefully selected. We recommend following virgin plastics resin as per their max temperature ratings:- |
|
| 1) PTFE:- 250ºC |
3) PVDF:- 120 ºC |
5) FEP:- 150 ºC |
| 2) PFA:- 250ºC |
4) ECTFE:- 140 ºC |
|
|
|
| Technical Specifications |
| Pipe Specifications |
: |
ASTM A 106 Gr. B, ANSI B36. 10 SCH 40/80 |
| Flange Specifications |
: |
ASTM A 105; A 181; ANSI B16.5 ASA 150/300 TYPE |
| Fittings Specifications |
: |
ASTM A234 GRWPB, A 106 GR. B; ANSI B16.9; B16.5 |
| Lining |
: |
As per ASTM F 1545 Type III. Other liner material such FEP/PVDF/PFA available on request |
| Lining Thickness |
: |
2-3 mm. (higher thickness for vacuum service) |
| Operating Pressure |
: |
Up to 20 bar / 250 psi |
| Operating Temperature |
: |
From -50ºc to 250º c. |
| Tests |
: |
10 kv Spart test / Hydro-testing:- From 10 psi to 430 psi. |
|
|
| Images of Fluoropolmer Line Products |
|
|
|
| Application Area & Industries |
|
- Where highly corrosive materials are used in any area of chemical process industries.
- Where product purity is critical.
- Where environmental pollution is to be avoided.
- Where pipe replacement is difficult or impossible.
|
| |
| Advantages of PTFE Lining |
|
- High Chemical Resistance
- High Temperature Resistance
- Non Contamination
- Low Cost
- Maintenance Free
- Long Durability
|
| |
We offer fully Lined valve range in PFA/FEP/PVDF or PP as per the requirements in order to provide complete solutions to CPI and related industries for their corrosion problems. |
| |
